Summer Starts Here - Save up to 70%
Roadmaster Battery Charge Line Kit Installation - 2014 Buick Enclave- Video
Hey everybody. My name is Ryan, and here at etrailer we install, test fit and review a lot of different parts. That way we can try to answer any questions those of you might have. And that's exactly what we're doing here today on our 2014 Buick Enclave. We're going to be taking a look at, and showing you how to install, the Roadmaster Battery Charge Line Kit for towed vehicles.Five main components needed to flat tow your Buick down the road safely. First one's going to be the baseplate. more
1/2/2021 12:37:11 PM
Rear View Safety Backup Monitor Installation - 2012 Buick Enclave- Video
Shane: Shane here with etrailer.com. Today we're going to be going over the RVS, rear view safety camera set up. This system typically is just going to come with your monitor. You're going to have to get your rear camera and your two side cameras if you decide to put those on.Another thing is typically we put these on campers or RVs. Because they're so big, it makes it a lot easier to either see past the camper or to see a couple of lanes over. The reason we put it on this car is the owner of the vehicle has a hard time turning his neck, so he wanted something that he can see a couple lanes over when he's either changing lanes or getting ready to turn, to give him that extra view that he needs because obviously he cannot turn his head.The camera set up, the RVS screen is going to be a 5.6 inch screen. more
10/11/2019 10:17:27 AM
Malone Hitch Bike Racks Review - 2014 Buick Enclave- Video
Today on our 2014 Buick Enclave, we're going to be test fitting the Malone Pilot 4 Bike Rack for number MPG2112-2115. We already have a bike installed on the rack, let's take a closer look and show off some of the features. One of the more common features about this bike is the fact that it can tilt away from the vehicle with all four bikes still attached so it can have rear hatch access. To do that, we'll come up to the front here, snap this loose, and lifting up on the rack a little bit, we'll remove the pin completely. You'll notice with that pin removed, it still doesn't fall. That's because there is a catch up at the front here to prevent it from falling so you don't have all that weight coming down at you at once, and you have time to come back here and get a decent grip. more
7/19/2017 7:57:27 AM
Trailer Wiring Harness Installation - 2013 Buick Enclave- Video
Today on our 2013 Buick Conclave, we'll be installing the Tow Ready, T1 Vehicle Wiring Harness, part number 118579. To begin our installation on the vehicle wiring harness, we'll need to raise the rear hatch of the vehicle. We'll need to remove each of the taillight assemblies. To do this, we'll need to remove two covers that cover up small bolts on each side. You'll see that there's a bolt under each cover. We'll need to remove each of these bolts. Once these two have been removed, we can gently slide the whole light assembly out towards the rear of the vehicle. more
2/10/2014 5:02:29 PM
Filter Videos
Filter Videos
